Back to Catalog
OTHER
OTHEROTHERBambu Lab
The Bambu Lab H2S Combo represents the cutting edge of 3D printing technology, setting new standards for speed and precision. This machine is not merely a printer but a complete fabrication system that delivers superior surface quality even at high speeds, thanks to its advanced closed-loop kinematics and powerful Active Control System (ACS). The H2S Combo features a generous build volume, allowing users to produce large prototypes or multiple small objects in a single job. A standout feature is seamless connectivity: equipped with integrated cameras and the intuitive Bambu Studio software, users can fully monitor and manage print jobs remotely. Designed for ultimate ease of use, the printer minimizes setup time with automatic bed leveling and intelligent filament detection. Included in the combo is the AMS (Automatic Material System), enabling multi-color prints without manual intervention. Ideally suited for engineers, professional designers, and advanced makers, this high-end printer is for those who demand reliability and detail while maximizing efficiency through rapid print speeds.
Machine TypeThe printing technology — FDM uses filament, SLA/DLP use resin, SLS uses powder
OTHER
Build VolumeMaximum printable size (Width x Depth x Height). Larger = bigger single-piece prints
256 × 256 × 256 mm
* Affiliate link: We may earn a commission if you purchase through this link – at no extra cost to you. Learn more
* Prices include VAT, plus shipping. We may earn a commission if you purchase through these links – at no extra cost to you. Last updated recently.
Prices may change. Historical data is for reference only.
No reviews yet
Print SpeedMaximum print speed in mm/s. Real-world speeds are usually 30-70% of max
up to 500 mm/s
Nozzle TemperatureMax nozzle temp determines which materials you can print — 300°C+ needed for Nylon/PC
up to 300 °C
Bed TemperatureMax heated bed temp — 100°C+ needed for ABS/ASA to prevent warping
up to 120 °C
Layer ResolutionMinimum layer height. Smaller = finer detail but slower prints
from 0.1 mm
Nozzle DiameterStandard is 0.4mm. Smaller for detail, larger for speed
0.4 mm
Filament DiameterMust match your filament — 1.75mm is standard, some use 2.85mm
1.75 mm
